From: David Bauer Date: Tue, 13 May 2025 23:49:44 +0000 (+0200) Subject: ramips: pad EX400 kernel partition to retain web recovery X-Git-Url: http://git.openwrt.org/%22https:/collectd.org//%22/%22https:/collectd.org/%22?a=commitdiff_plain;h=eea4689654e1b07cffe62bc97ad8fef0474bb3b7;p=openwrt%2Fopenwrt.git ramips: pad EX400 kernel partition to retain web recovery The web-recovery of the Genexis EX400 validates uploaded images to fit in the rootf_0 partition. With OpenWrt, only the kernel is stored in this partition, leaving the partition very small. Currently, the first factory release image won't be accepted by the recovery interface after the OpenWrt installation. Pad the image of the ubifs to 10MB. This allows the 24.10 release image to be uploaded, enabling device recovery. Signed-off-by: David Bauer --- diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 79027c8c32..1c2aa000c3 100755 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -1419,7 +1419,7 @@ ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) IMAGE/factory.bin := append-image-stage initramfs-kernel.bin | \ inteno-bootfs | inteno-y3-header EX400 | append-md5sum-ascii-salted endif - IMAGE/sysupgrade.bin := append-kernel | inteno-bootfs | \ + IMAGE/sysupgrade.bin := append-kernel | inteno-bootfs | pad-to 10M | \ sysupgrade-tar kernel=$$$$@ | check-size | append-metadata DEVICE_IMG_NAME = $$(DEVICE_IMG_PREFIX)-$$(2) DEVICE_PACKAGES := kmod-mt7603 kmod-mt7615-firmware kmod-usb3 kmod-keyboard-sx951x kmod-button-hotplug